Formwork Direct International, Liverpool, UK | New and Used Formwork For Hire and Sale
Formwork, Falsework, Scaffolding, Edge Protection, Concrete Chemicals and Concrete Accessories.
Acrow Props

Acrow Prop

FDI Adjustable Steel Props

Adjustable Steel Props are designed to support a range of floors and temporary beams.

FDI Props are manufactured from an outer tube 60.3mm Dia and an Inner tube of 4.83mm Dia. The threaded portion is friction welded to the outer tube to produce a lighter weight Prop.

Adjustable Steel Props are available in sizes No.0 to No.4.

Props are guaranteed to be in stock and delivered within 3 days of a order.

All FDI Props are manufactured in accordance with ISO 9001:2000 quality system accreditation. ( Acrow Prop Technical Information Below)

 Acrow Prop Description

Acrow Prop Length (m)

 Acrow Prop Weight (KGs)

CLOSED

OPEN

Standard No. 0 Props

1.041

1.829

11.28

Standard No. 1 Props

1.753

3.124

16.34

Standard No. 2 Props

1.981

3.352

17.48

Standard No. 3 Props

2.590

3.962

20.20

Standard No. 4 Props

3.200

4.876

23.84

Technical Information

All Props are manufactured to BS4074:1982 and tested to BS5507-3:1982.

Head and Base Plates 150x150 x 6 mm to BS4360 with 38mm Dia hole.

Pin 080M40 BS970.

Finished in one coat air drying.

 

FDI Adjustable Steel Push-Pull Props

Adjustable Steel Push-Pull Props are designed for holding and plumbing single and double faced forms. The lower plate is fixed to a ground anchor with the top plate being fixed to the shutter.

The Adjustable Push-Pull Prop includes the standard Prop Collar with an additional locking Collar to maintain rigidity and maximum safety.

Adjustable Steel Push-Pull Props are available in sizes No.0 to No. 4 and are supplied with two collars.

All FDI Props are manufactured in accordance with our ISO 9001:2000 quality system accreditation. (Push Pull Prop Technical Informtation Below)

 Push Pull Prop Description

Push Pull Prop Length (m)

Push Pull Prop Weight (KGs)

CLOSED

OPEN

Heavy Duty Push Pull Props No. 0

1.140

1.829

15.8

Heavy Duty Push Pull Props No. 1

1.850

3.124

23.0

Heavy Duty Push Pull Props No. 2

2.080

3.352

24.0

Heavy Duty Push Pull Props No. 3

2.690

3.962

27.0

Heavy Duty Push Pull Props No. 4

3.300

4.876

31.6


Technical Information

All Props are manufactured to BS4074 and tested to BS5507.

Base Plate: 150mm x 150mm x 12mm

Head Plate: 90mm x 150mm x 12mm

Bolt: M16 x 100 HT, Nyloc nut.

Pin: 080M40 BS970.

Finished in one coat air drying.

 

FDI Adjustable Steel Trench Struts

FDI offer an Adjustable Steel Trench Strut which feature clawed end plates to support and grip the trench lining.

All Adjustable Steel Trench Struts are thread rolled so there is no cutting away of material or loss of strength.

Adjustable Steel Trench Struts are available in sizes No.0 to No.3.

All FDI Trench Struts are manufactured in accordance with our ISO 9001:2000 quality system accreditation. (Trench Strutt Technical Information Below)

Trench Strutt Description

Trench Strutt Length (m)

Trench Strutt Weight (KGs)

CLOSED

OPEN

No. 0 Strut

0.32

0.47

4.0

No. 1 Strut

0.49

0.73

5.8

No. 2 Strut

0.69

1.09

7.7

No. 3 Strut

1.03

1.73

11.0

Technical Information

All Struts are manufactured to BS4074:2000.

Sizes 1, 2, 3 supplied with captive inners.

Safe working load: 3 Tonnes any size any extension.

Finished in one coat air drying. 

 

Acrow Prop Components in Detail


Prop Head: 150 x 150 x 6mm plates with holes for securing to timber beams or facilitating the use of accessories.
Prop Inner Tube: 48.3mm O.D. tube (standard scaffolding tube size) with holes at 152.5mm centres. Tube diameter enables standard scaffold tube and couplers to be used for bracing purposes.
Prop Outer Tube: 60.3mm O.D. Bottom plate identical to prop head. Reduction couplers enable standard scaffold tube to be connected to outer tube for bracing purposes.
Thread: On the outer tube the thread provides the ability for each prop to have infinite adjustment within its given range.
Nut: Self-cleaning nut has a hole located at one end for easy turning when prop handle is near walls. Additional nut can be added to convert prop to push-pull strut.


SETUP01.gif

 Acrow Prop  (Acrow Props Technical Information)(Acrow Prop Technical Information below)   (Acrow Prop Loading table Below) (Acrow Prop Safe Working loads Below)( Acrow Prop Safe Working loads)

(Acrow Props)  SAFE WORKING LOAD (kN) FOR FDI PROPS LOADED CONCENTRICALLY AND 1.5 MAX. OUT OF PLUMB  

Recommended safe working loads for props supporting Metriform or similar formwork systems ensuring concentric loading. Also for timber bearers where forl heads are used to ensure concentric loading, but load on prop may be limited by allowable stress in timber.  

 

 

 

 

 

 

PROP HEIGHT (M)

No. 0 Code  10005

No. 1

10010

No. 2

10020

No. 3

10030

No. 4

10040

1.250

32

 

 

 

 

1.500

32

 

 

 

 

1.750

21

32 

 

 

 

2.000

 

32

32 

 

 

2.250

 

32

32 

 

 

2.500

 

26

26

 

 

2.750

 

23

23

23 

 

3.000

 

19

19

19 

 

3.250

 

 

17

17 

24 

3.500

 

 

 

 15

19 

3.750

 

 

 

 13

15 

4.000

 

 

 

 12

18 

4.250

 

 

 

 

 11

4.500

 

 

 

 

 10

4.750

 

 

 

 

 9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  
(Acrow Props) SAFE WORKING LOAD (kN) FOR FDI PROPS LOADED CONCENTRICALLY AND SUITABLY LACED WITH TUBE AND FITTINGS
 

Recommended safe working loads for props laced in two directions, at right angle, at a level 1/3 of the height of the extended inner tube. The lacing and the formwork deck must be restrained against horizontal movement by tying to the building or by diagonal bracing.

When using the loading tables, the height of any drop head or similar attachment should be included in the prop height.

 

 

 

 

 

 

PROP HEIGHT (M)

No. 0 Code  10005

No. 1

10010

No. 2

10020

No. 3

10030

No. 4

10040

1.250

 

 

 

 

 

1.500

 

 

 

 

 

1.750

 

 

 

 

 

2.000

 

 

 

 

 

2.250

 

 

 

 

 

2.500

 

32

32

 

 

2.750

 

32

32

32 

 

3.000

 

32

32

32 

 

3.250

 

 

32

32 

32 

3.500

 

 

 

 28

32 

3.750

 

 

 

 24

30 

4.000

 

 

 

 20

26 

4.250

 

 

 

 

 22

4.500

 

 

 

 

 19

4.750

 

 

 

 

 16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Acrow Props) SAFE WORKING LOAD (kN) FOR FDI PROPS LOADED 25mm MAX. ECCENTRIC AND 1.5 MAX OUT OF PLUMB.  

Recommended Safe working loads for props where concentric loading cannot be guarenteed. When supporting timber bearers prop load may be limited by allowable stress in timber.  

 

 

 

 

 

 

 

PROP HEIGHT (M)

No. 0 Code  10005

No. 1

10010

No. 2

10020

No. 3

10030

No. 4

10040

1.250

17

 

 

 

 

1.500

17

 

 

 

 

1.750

17

17 

 

 

 

2.000

 

17

17 

 

 

2.250

 

17

17 

 

 

2.500

 

17

17

 

 

2.750

 

17

17

17 

 

3.000

 

15

15

15 

 

3.250

 

 

13

13

17 

3.500

 

 

 

 11

14 

3.750

 

 

 

 10

11 

4.000

 

 

 

 

10 

4.250

 

 

 

 

 9

4.500

 

 

 

 

 8

4.750

 

 

 

 

 7

        5.000

 

 

 

 

          7

 

 

 

 

 

 

 

 

 

 

 

 

 

Source: calculated in accordance with BS449: Part 2 : 1969 but using a load factor of 2

 

(Acrow Props heights below)

 

Size

Height Closed

Height Extend

Inner Length

Outer Length

Nett Weight

0

1041

1829

1003

1016

11.28kg

1

1753

3124

1634

1481

16.34kg

2

1981

3352

1981

1676

17.48kg

3

2590

3962

2540

1676

20.20kg

4

3200

4876

3150

2057

23.84kg

FDI Strongboy

 

 

The Strongboy offers a new dimension to the construction industry:

 

  • Simplistic & Robust
  • Cost Effective
  • Efficient

 

The Strongboy is used as an adaption to an Adjustable Steel Prop to provide support to brickwork and other construction support structures.

 

Due to the Strongboy's robust dynamics, it can be fitted between courses on a double-skin, brick cavity wall from either side. Therefore providing a cost effective, efficient and safe construction component.

 

The Strongboy is zinc plated, this ensures a long life and low maintenance product.

 

All FDI Strongboys are manufactured in accordance with our ISO 9001:2000 quality system accreditation. The Strongboy name & design are covered by a Patent.

 

Description

Weight

Strongboy

5.8KG

Technical Information

Max Loading: 340kg

Max working height: 3m

Max spacing: 900mm

Patent Registered

 

We can provide hire & sale on all items listed above.

Enquire about our Products
Name  *
E-mail  *
Telephone Number
Your Enquiry  *
* Required fields



Tel (+44) (0)151 532 0179

Fax (+44) (0)151 523 8330

 

24 Hour International number 0044 845 387 0126

or email

sales@formworkdirect.co.uk

www.formworkdirect.co.uk

Formwork direct, suppliers of formwork, falsework, scaffolding and concrete accessories delivered direct at great prices.

Copyright 2010 - Formwork Direct International – Formwork Liverpool | Formwork Hire | Used and New Formwork Equipment for Sale.
We have various packages in stock and we are also part of the International used and new Formwork and Scaffolding trade.

Please see below some of our Used Wall Formwork Packages, Used Shoring Systems, Used Scaffolding, Used Scaffolding Systems, Used Super Slim Soldiers, Used Frami Formwork, Used Framax Panel Formwork Systems, Used Peri Panel Formwork Systems, Used Meva Panel Formwork Systems, Used Quickstage Scaffolding Systems, Used Cuplock Scaffolding Systems, Used Combisafe Edge Protection Scaffolding Systems, Used H20 Timber Beams, Used Scaffolding Tubes and Scaffolding Systems, Used Aluminium Beam Systems, Used Shoring Towers, Used Concrete Frame Systems, Used GAS Shoring Towers, Used Aliminium Shoring Towers, Used Ringlock Scaffolding Systems, Used FD Light Formwork Systems and Used FD Max Formwork Systems.

As You can see we have lots of Used Scaffolding Systems, Formwork Systems and Edge Protection Scaffolding Systems, is there is anything you may require please dont hesitate to contact us on the numebrs below, no matter what your Used Formwork and Used Scaffolding System needs we will find them for you.
Acrow prop new, acrow prop used, acrow prop hire, acrow prop liverpool, acrow prop uk, Acrow props new, acrow props used, acrow props hire, acrow props liverpool, acrow props uk, second hand acrow prop, second hand acrow props

All Rights Reserved...
Formwork HomeFormwork ProductsChemicalsSystem ScaffoldingUsed ScaffoldingBrochuresSafety EquipmentFormwork AccessoriesImage Gallery